We do not stock most inventory. Shipping ETAs or Status Updates on Products/All Pending Custom Orders are not available during production. If part(s) are on our/vendors shelf, they will ship ASAP. OEM Parts ON the shelf in Michigan, plan for a minimum of (7) Days. Please refer to the Shipping & Returns section link at the bottom of this page for ALL info. Custom Painted/Carbon Fiber/Upholstery Orders are 3-6 Weeks from OUR receipt of the part(s)
The DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV/Gen V GM V8 vehicles. Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup. Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.
This kit uses:
Genuine GM Flex Fuel sensor
Plumbing kit made of corrosion resistant materials to ease installation
Plug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling
DSX Tuning 3D printed fuel line disconnect
COMPATIBILITY NOTE: If you have a 2005 C6 Corvette, You will need to inform us in order notes or after the order has been placed. The 2005 C6 ECU varies from the 2006-2013 C6 Corvette.
PLEASE NOTE: It is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through HP Tuners or EFILive.
The DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV/Gen V GM V8 vehicles. Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup. Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.
This kit uses:
Genuine GM Flex Fuel sensor
Plumbing kit made of corrosion resistant materials to ease installation
Plug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling
DSX Tuning 3D printed fuel line disconnect
COMPATIBILITY NOTE: If you have a 2005 C6 Corvette, You will need to inform us in order notes or after the order has been placed. The 2005 C6 ECU varies from the 2006-2013 C6 Corvette.
PLEASE NOTE: It is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through HP Tuners or EFILive.
350-Flex-C6LS237-0613
Customer Reviews
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.