We do not stock most inventory, we are unable to provide ETAs or status updates on Parts/Pending Orders. If part(s) are on our/vendors shelf, they will ship ASAP. Any OEM Parts ordered AND on the shelf in Michigan, plan for a minimum of (2) Weeks. Please refer to the Shipping & Returns section link at the bottom of this page for ALL info. Custom Paint/Carbon Fiber ETC Orders are 3-6 Weeks from OUR receipt of the part(s)

2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
  • Load image into Gallery viewer, 2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
  • Load image into Gallery viewer, 2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
  • Load image into Gallery viewer, 2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
  • Load image into Gallery viewer, 2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
  • Load image into Gallery viewer, 2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
  • Load image into Gallery viewer, 2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
  • Load image into Gallery viewer, 2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
  • Load image into Gallery viewer, 2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
  • Load image into Gallery viewer, 2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
  • Load image into Gallery viewer, 2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System
  • Load image into Gallery viewer, 2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System

2014 - 2019 C7 MACH Force-Xp 3" to 2-1/2" 304 Stainless Steel Axle-Back Exhaust System

| item#49-34056-Pjs
Vendor
AFE Power
Regular price
$2,774.00
Regular price
Sale price
$2,774.00
Sold out
Unit price
per 
Shipping calculated at checkout.
Have a Question? Ask a Specialist
(407) 683-7160 Live Chat
Return Policy All Sales Final
Payment Methods Most Major Credit Cards
Support via Phone or Text

(C7) 14-19 V8-6.2L (LT1) W/ Factory Style NPP & AFM Valves

 

Testing:
In testing, the axle-back exhaust system resulted in gains up to +7 horsepower and +10 lbs. x ft. of torque verified by our in-house dyno

Aggressive Sound:
Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Exhaust Valve:
This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.

Simple Installation:
This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation.

Quad 4" Polished Tips:
Finishing off this system are quad 4" diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Brushed 304 SS Construction:
The performance axle-back exhaust system is constructed of 3" mandrel-bent, brushed 304 stainless steel tubing for maximum power, corrosion resistance and strength eliminating cracking.

Note:
Failures of original equipment AFM and NPP actuators are not covered by aFe POWER's warranty

Emissions Disclaimer:
This product does not require a CARB EO#

All aFe systems are engineered and manufactured in their Corona, California facility.

(C7) 14-19 V8-6.2L (LT1) W/ Factory Style NPP & AFM Valves

 

Testing:
In testing, the axle-back exhaust system resulted in gains up to +7 horsepower and +10 lbs. x ft. of torque verified by our in-house dyno

Aggressive Sound:
Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Exhaust Valve:
This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.

Simple Installation:
This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation.

Quad 4" Polished Tips:
Finishing off this system are quad 4" diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Brushed 304 SS Construction:
The performance axle-back exhaust system is constructed of 3" mandrel-bent, brushed 304 stainless steel tubing for maximum power, corrosion resistance and strength eliminating cracking.

Note:
Failures of original equipment AFM and NPP actuators are not covered by aFe POWER's warranty

Emissions Disclaimer:
This product does not require a CARB EO#

All aFe systems are engineered and manufactured in their Corona, California facility.

Customer Reviews